What is the difference between electrogalvanized wire and hot-dip galvanized wire?

    There are many products on the market for galvanizing lines, which can be roughly divided into two categories: one is continuous hot-dip galvanizing line and the other is continuous electrogalvanizing line. How to distinguish between these two small parts galvanizing line? Don't worry, the factory will give you a trick!

    1. In general, the main difference between continuous electroplated zinc wire and continuous hot-dip galvanizing wire is the way they are produced. The continuous hot-dip galvanizing line is to dissolve the zinc in the boiler and then obtain the dissolved liquid, and the continuous electroplating zinc wire is, as the name suggests, is obtained by reacting the electrode. Manufacturers can easily identify these two different small parts galvanizing lines by means of production.

    2. Compared with the continuous hot-dip galvanizing line, the continuous electro-galvanizing line is used on the steel, and its anti-corrosion effect is far less than that of the continuous hot-dip galvanizing line. The main reason is that the amount of galvanizing on the continuous electroplated zinc wire is not as much as that of the continuous hot-dip galvanizing line, and it is not evenly distributed according to the distribution, so the service life is greatly shortened, generally two or three. It rusts in years, and some of the poor quality continuous electrogalvanized wires may produce rust in a non-dry environment for ten days. Therefore, we also recommend that consumers choose continuous hot-dip galvanizing lines when purchasing small parts galvanizing lines.

    3. The process of hot-dip galvanizing and cold-dip galvanizing is also different. Cold-galvanizing is the process of first cleaning the raw materials with chemical reagents or chemical methods and then putting them into the plating solution. The hot-dip galvanizing is a method of directly feeding the raw materials into the zinc liquid and then forming a zinc-iron alloy. These two small parts galvanizing lines are also very different in performance due to different production processes.

After listening to the above introduction, I believe that you have a certain understanding of the small parts galvanizing line, do not make mistakes when buying!