What method is used to add zinc to the galvanizing pot?

Hot-dip galvanizing is an effective means of metal protection. To improve the corrosion resistance and wear resistance of metals, the metal surface has been coated with some paints. Although it can have some effects after painting, the effect is not very good. The product is galvanized by immersing the metal in the molten zinc solution and chemically reacting with zinc, and a zinc alloy is formed to protect the metal. The zinc solution is heated in a galvanizing pot.

How does the temperature of the zinc liquid rise?

When the zinc liquid is to be molten, that is, the temperature of the zinc liquid is to be raised, what is the method? Heating the zinc solution can increase the temperature. The quality of the zinc liquid is good, and it has a good effect after galvanizing. The zinc liquid is stored in the heat preservation tank. This is an industrial storage tank, which not only can keep the heat but also prevent the leakage of the zinc liquid. How does the zinc solution enter the galvanizing pot in the tank? This is to do it with a zinc pump. The pump can transport the liquid from a low place to a high place, and the zinc liquid in the storage tank can be extracted and injected into the pot without any problem, and the operation is more convenient and does not cause harm.

The galvanizing pot works in conjunction with the zinc furnace and the effect is excellent.

The pot is only used to hold the zinc liquid container. The temperature of the zinc liquid is increased, and the furnace is required to burn the fuel for heating. The pot and the furnace are indispensable in the galvanizing process. The fuel of the furnace burns to generate flame, the heat is transferred to the pot, and the pot also has thermal conductivity, so the temperature of the zinc liquid in the pot rises and reaches the molten state. The galvanized metal is immersed in the zinc solution. In the pot, there is a chemical reaction between zinc and metal. The alloy coating is also formed on the surface of the metal, and then passivation and other operations are performed. Finally, the galvanization is completed. The whole link. To ensure the quality of galvanizing products, it is necessary to use galvanizing pot, furnaces, zinc pump and other equipment.