A few points to note about the galvanizing pot

Zinc pot technology is now a frontier technology at home and abroad.galvanizing pot technology is also used in our daily large and small household appliances, but in the maintenance of zinc pot there are a few precautions, do you know?

1. Regularly remove the bottom slag in the zinc pot

The reason for the removal of zinc pot bottom slag, is because of residual slag is toxic, body to absorb excess zinc, loss of appetite, anemia, abdominal pain, even life threatening. So must clear the bottom slag regularly, cannot harm the health of the family. In addition, if the zinc pot bottom residue is not cleaned in time, it will also leave the residual zinc residue, affecting the induction life.

2. Check the power supply regularly

Power supply is very important, not only to check the power in use, but also to check the backup power. Once the power is out of order, use a backup power supply. If the backup power fails and you don't see it, the zinc pot will have to stop working. Therefore, regular inspection is necessary to prevent the disease.

Dust regularly

Dust on the machine needs to be cleaned regularly, otherwise it will affect the service life of the machine. Especially the zinc pot needs more maintenance, and if there is water, it should be cleaned timely. In the process of cleaning, it is necessary to clean every component before it is affected.

Record data at all times

If the data becomes very abnormal, there is something wrong with the machine. At this time, professional personnel are needed to maintain the zinc pot. You can also record the data and see how efficient it is, without putting too much burden on the machine.

Maintain the galvanizing pot, as long as you pay attention to these considerations, you can make the machine live longer. As long as the maintenance process, correct maintenance will not be a problem.